Cary, NC HVAC & Electrical

Traced and accessed existing fan box that was previously sheetrocked over in kitchen ceiling. Established new electrical pathway from fan box location down to a newly installed light switch, restoring functionality for future lighting installation. Inspected attic space to verify proper routing and connection of wiring through insulated area.

Inspected electrical panel and confirmed non-compliant dishwasher outlet. Recommended and provided quote for installation of code-compliant outlet with GFCI protection to accommodate new dishwasher installation. Customer was advised of warranty coverage on parts and labor before proceeding with work.

Successfully completed a 200 Amp meter base replacement with underground service, installing a new PVC riser. Performed Level 2 bonding of gas/water lines and installed a main grounding system in accordance with permit #26-7253 and Duke disconnect/reconnect orders.

Diagnosed power outage affecting entire residence with specific focus on non-functioning EV charger outlet in garage. Inspection of main electrical panel revealed tripped breaker, which was reset to restore power to the EV charging circuit. Performed visual inspection of outdoor AC unit and surrounding electrical connections to verify no external factors contributed to the system-wide power interruption.

Successfully installed REME HALO UV light air purification system in upstairs HVAC unit. System was properly mounted, wired to power source, and sealed with Shurtape SF 685 mastic. Unit is functioning correctly with proper airflow indicators.

Successfully completed installation of a new ventilation system with ductwork in the client's garage. The installation included mounting metal brackets to the ceiling for proper support of the metallic and insulated white pipes, and connecting the rectangular metal housing unit with circular opening for airflow. All components were properly assembled and electrical connections were verified for optimal functionality.

Completed service change and installation of Tesla EV charger at residential property built in 1995. Replaced aging main electrical panel showing weathering and wear with new equipment to support additional load requirements. Work required coordination with utility for disconnect/reconnect and passed inspection for service restoration.

Completed annual 32-point electrical system evaluation on 1993 home, including full panel maintenance with connection torque verification. Tested GFCI/Arc Fault protection systems using Klein Tools RT390 analyzer, confirming proper functionality with voltage readings between 109.4V-122.3V. Performed smoke/CO2 detector maintenance with battery replacement and completed customer-requested light bulb replacements and ceiling fan cleaning.

Completed 32-point electrical system evaluation including panel maintenance with connection torque verification and breaker testing. Inspected exterior electrical service entrance with digital meter and main panel, and assessed interior electrical panel for potential cookstop installation requirements. Tested GFCI/Arc Fault protection systems and performed smoke/CO detector maintenance with battery replacement.

Performed assessment for customer-supplied 12-circuit manual transfer switch installation. Inspected existing meter and electrical service equipment. Provided professional recommendations including new main grounding system, whole home surge protection, and equipment surge protectors for AC units, with associated warranty information documented and left with customer.

Completed comprehensive electrical upgrade project including replacement of two damaged outlet boxes, six malfunctioning light switches, and eight outlets with poor plug retention. Additionally installed exterior junction box for ring camera installation and upgraded laundry room with GFCI protection. Post-installation testing confirmed all outlets operating at proper 120V with correct wiring configuration.

Completed installation of new dryer breaker and receptacle according to specifications, replaced two damaged switch boxes on the second floor with proper wire repulling through wall cavities. Successfully installed a fire-protected breaker for the multi-wire bedroom circuit and upgraded electrical safety by installing new GFCI outlets at the kitchen range and washing machine locations, with all work verified through proper voltage testing.

Inspected extensive wiring damage in attic caused by squirrel infestation, documenting all compromised electrical components with photos for homeowner review. Restored power to non-functioning light fixtures by repairing severed wiring connections and replacing damaged components. Removed large contractor light fixture in master bathroom and installed proper wiring for two separate light fixtures, ensuring all work meets electrical code requirements.

Responded to flickering lights complaint at 1992 residence. Inspection revealed significant damage to service panel with burnt and charred wiring at the connection points. Identified faulty connections at the main lugs as the source of the intermittent power issues and electrical hazard.

Responded to service call for beeping in garage and inoperable garage door. Inspection revealed low battery in garage door backup system causing the alert sound. Replaced battery and verified proper operation of garage door opener, confirming resolution of both the beeping issue and door functionality.

Completed installation of new under-cabinet lighting in kitchen, replacing existing units with updated fixtures. Installed new pendant light over sink and reinstalled island outlet as specified in original estimate. Replaced all smoke detectors throughout the home and installed new hood fan with proper electrical connections.

Completed installation of three pendant lights over kitchen island and one additional light fixture in stairwell area requiring tall ladder (approximately 12-15 ft height). Customer-provided fixtures were properly mounted and connected to existing electrical system, with special care taken to avoid standing on kitchen island as requested. All installations were tested and verified operational.

Performed scheduled HVAC POM service and investigated two reported issues. Inspected blower wheel assembly that was producing excessive noise, finding signs of wear and potential imbalance. Examined second unit's integrated dehumidifier which was non-functional, contributing to excessively dry indoor conditions. Documented system conditions with detailed photos of components and electrical connections for further assessment.

Responded to service call for doorbell installation. Performed electrical testing with Fluke 323 clamp meter, confirming 222V reading at the installation site. Successfully hardwired new doorbell system to replace previous battery-operated Ring device, ensuring compatibility with customer's CPI security system installation.

Responded to service call for non-functioning garbage disposal outlet. Upon inspection, discovered GFCI outlet was tripped and reset it to restore power. Also performed safety check of electrical panel, confirming proper breaker function and wire connections for the disposal circuit.

Successfully completed the installation of a circuit breaker panel, properly mounting it to the wooden structure and connecting all necessary electrical circuits. Crimped the existing non-continuous water bond per service requirements, ensuring proper electrical grounding and safety compliance.

Conducted comprehensive electrical safety inspection of 1985 residence. Examined service panel and meter installation on exterior, noting proper connection of main electrical components. Inspected and evaluated reported issues with kitchen lights and outlets, providing appropriate recommendations for resolution.

Installed a new dedicated electrical outlet for customer's microwave, replacing the previous hardwired connection. Properly labeled the outlet "MICROWAVE" and verified connection to appropriate circuit breaker in the panel. Successfully completed installation allowing for proper operation of customer's new microwave unit.

Performed diagnostic assessment on commercial LED lighting system experiencing persistent flickering throughout the building. Inspected electrical panel to evaluate power supply and wiring integrity. Visual examination revealed properly organized circuit breaker configuration with appropriate wire routing and connections, suggesting the flickering issue may require further investigation of the LED fixtures or driver compatibility.

Performed inspection of multiple light fixtures (kitchen island lights, office globe light, master bathroom light and fan) to assess repair viability. Evaluated electrical panel and exterior meter installation for proper function. Provided professional assessment on repair versus replacement options and discussed potential installation of three additional light fixtures.