Expert Electrician & HVAC Services in Clayton, NC
Since 2005, Dawson's Electric & Air has earned the trust of homeowners in Clayton by delivering dependable electrical, heating and cooling services with honesty and integrity.
Built on a commitment to straightforward communication, quality workmanship, and reliable results, the team takes pride in providing solutions that homeowners can feel confident about. When you want experienced professionals who put your needs first and stand behind their work, Dawson's Electric & Air is a name you can count on.
A broken air conditioner or malfunctioning furnace can disrupt your comfort when you need it most. Dawson's Electric & Air provides fast, dependable HVAC repair services to get your system back up and running quickly.
Our licensed electricians technicians also specialize in electrical repairs, electrical panel upgrades, EV charger installations, wiring, lighting, and a full range of residential electrical services. Whether you need emergency repairs or a planned home improvement, you can count on expert workmanship, honest recommendations, and reliable service that keeps your Clayton home comfortable, safe, and energy efficient.
Prevent Breakdowns Before They Happen — Schedule HVAC & Electrical Service
Routine maintenance and expert inspections keep your home safe, efficient, and comfortable year-round.
Call 919-887-8284 to get your electrical and HVAC service scheduled or contact us online with any quetions.
Clayton Electrician Service FAQs
Why does my breaker trip when my HVAC turns on?
Startup amperage draw from compressors can stress marginal panels. If your circuit breaker keeps tripping during AC cycles, you may need:
-
Dedicated circuit upgrade
-
Panel evaluation
-
Breaker replacement
Electrical repair must address root cause, not just reset.
Do I need professional ceiling fan or light fixture installation?
Yes. Proper installation ensures:
-
Box rated for fan support
-
Secure mounting
-
Balanced load
DIY mistakes commonly cause wobble and wire damage.
Is EV charger installation common near me?
Increasingly so. Subdivisions with multi-vehicle households often require service upgrades before installing Level 2 chargers.
Clayton HVAC Company Service FAQs
Why is my AC blowing warm air suddenly?
Potential causes:
-
Refrigerant loss
-
Clogged drain triggering float switch
-
Failed capacitor
-
Thermostat malfunction
Prompt AC repair prevents compressor damage.
When should I replace instead of repair?
If your system:
-
Exceeds 12–15 years
-
Requires multiple repairs annually
-
Struggles with humidity control
HVAC replacement improves comfort and efficiency long term.
Why Choose Dawson's Electrical & Air?
Over the years, we've helped thousands of families keep their homes comfortable and safe, handling everything from emergency AC repairs in the middle of summer to heating system replacements before winter sets in.
Our approach is simple: show up on time, explain what's going on in plain language, give you honest pricing upfront, and complete the work with the kind of craftsmanship we'd want in our own homes. No gimmicks, no shortcuts—just quality work from people who take pride in what they do and care about the community we serve.
Get 5 Star Service Near You
Five-star service isn't something we just talk about. It's something we deliver on every single job, and our reviews prove it. Over the years, we've earned hundreds of five-star ratings from customers right here in Clayton who've trusted us with their electrical and HVAC needs.
Whether it's an AC installation, a heating repair, or rewiring part of their home, people appreciate the way we handle their projects with care and respect. Don't just take our word for it, though.
Serving Clayton Neighborhoods
We provide services across Clayton communities such as:
-
Flowers Plantation
-
Portofino
-
Riverwood Athletic Club
-
Cobblestone
-
Broadmoor West
-
Homes near Clayton River Walk on the Neuse
-
Areas along NC-42 and US-70 Business
Rapid subdivision growth here makes panel capacity planning and proper HVAC sizing critical for long-term performance.
See what your neighbors are saying about our working with our team and service below!
You'll find honest feedback from real people who've experienced the quality and professionalism we bring to every call.
From the first phone call to the final walkthrough, we're committed to earning those five stars. When you're ready for electrical or HVAC service that's done right, call us at 919-887-8284 to schedule your appointment.
Recent Jobs and Reviews in Clayton, NC
Our Local Reviews by City
- Angier, NC (30)
- Apex, NC (79)
- Benson, NC (1)
- Broadway, NC (1)
- Bunnlevel, NC (1)
- Cary, NC (70)
- Chapel Hill, NC (28)
- Clayton, NC (11)
- Coats, NC (3)
- Dunn, NC (1)
- Durham, NC (25)
- Fuquay-Varina, NC (230)
- Garner, NC (20)
- Godwin, NC (1)
- Holly Springs, NC (89)
- Knightdale, NC (2)
- Lillington, NC (21)
- Middle Creek, NC (3)
- Middle Creek Township, NC (1)
- Moncure, NC (1)
- Morrisville, NC (4)
- New Hill, NC (1)
- Panther Branch, NC (2)
- Pittsboro, NC (14)
- Pleasant Grove, NC (2)
- Raleigh, NC (104)
- Sanford, NC (1)
- Wake Forest, NC (9)
- Wendell, NC (4)
- Willow Spring, NC (5)
Job Locations and Reviews
Responded to service call for 2022 HVAC unit with reports of disconnected flex duct, need for routine maintenance, and increased utility costs. Inspected attic ductwork and identified flex duct separation that had been temporarily repaired by homeowner with tape; properly reconnected and sealed duct connection to restore system integrity. Performed complete system evaluation including electrical testing with multimeter to verify proper voltage and amperage at unit, inspected all electrical connections and wiring within control compartment, and assessed overall system operation. Confirmed unit operational status and addressed airflow concerns related to duct separation that likely contributed to increased energy consumption.
Completed fall preventive maintenance on two HVAC systems, performing comprehensive 80-point inspection on each unit. Addressed customer concerns regarding humidity control and thermostat operation. Cleaned outdoor condenser coils, performed burner cleaning, verified and adjusted gas pressures to manufacturer specifications, and conducted complete safety inspections. Tested electrical components and monitored refrigerant system performance to ensure optimal heating season operation.
Responded to no cooling complaint on upstairs system with reported ice formation on outdoor unit. Upon arrival, performed diagnostic evaluation of system that had been shut off by homeowner. Inspected contactor assembly and electrical connections in outdoor unit, verified proper wiring and component condition. Measured electrical current draw using clamp meter, recording 0.52 amps with system operational. Assessed evaporator coil freeze-up condition and identified root cause of cooling failure, likely related to restricted airflow or refrigerant charge issue that caused ice accumulation on outdoor coil.
Responded to no power error on downstairs Nest thermostat indicating no power to red wire. Inspected outdoor unit electrical control panel and found loose or disconnected R-wire at terminal block affecting 24V power supply to thermostat. Secured wiring connections at control board, verified proper voltage at terminals, and confirmed thermostat restored to normal operation with error code cleared.
Responded to service call for condensation buildup near furnace in crawl space. Upon inspection, diagnosed failed dual-run capacitor on 14-year-old HVAC system. Replaced defective MARS 35+5 μF 440VAC capacitor with new unit and verified proper electrical connections. Performed system diagnostics using digital manifold gauges, confirming R-410A refrigerant pressures and temperatures within manufacturer specifications. System tested and operating normally with no further condensation issues observed.
Prompt
Responded to no-cooling call on 10-year-old system with thermostat stuck on permanent hold and inoperative fan. Upon arrival, found Honeywell programmable thermostat displaying 78°F but system unresponsive to commands. Inspected thermostat settings and confirmed fan mode set to auto with system unable to initiate cooling cycle. Documented thermostat display and equipment location for service records.
Responded to no cooling complaint on 3.5-year-old system that was blowing air but not cooling. Upon arrival, unit was turned off. Performed diagnostic testing using refrigerant manifold gauge, which revealed abnormal pressure readings. Inspection of indoor blower assembly showed significant dust and debris accumulation on blower wheel blades, which can restrict airflow and reduce system efficiency. Documented system conditions and provided findings to customer.
Completed comprehensive heating and air maintenance on single system including full 80-point inspection of air handler unit located in attic space. Performed outdoor coil cleaning, burner cleaning, verified and adjusted gas pressures to manufacturer specifications, and conducted complete safety inspection of all system components. Measured and documented refrigerant pressures for R-410A system showing 146.1 psig low side and 226.9 psig high side with superheat at 5.14°F, confirming proper system charge and operation.
Responded to no cooling complaint following power outage on 9-year-old system. Upon arrival, found thermostat in off mode and unit not operating in cooling. Verified thermostat settings and performed system diagnostics. Measured static pressure at 0.20 hPa using digital manometer to confirm airflow parameters. Reset thermostat to cooling mode and cycled system through startup sequence. Verified proper airflow through supply registers and confirmed system returned to normal cooling operation after power cycle reset.
Completed comprehensive heating and air maintenance including 80-point inspection on all units. Performed outdoor coil cleaning, burner cleaning, gas pressure adjustments, and thorough safety inspections. Verified electrical amperage readings at 164A using clamp meter and documented outdoor unit condition with visible debris accumulation on condenser coils prior to cleaning.
Aaron came out to take care of an A/C service issue. He found and fixed the issue in nothing flat. He was very professional and personable to work with.
The overall experience we’ve had with Dawson’s has been great. Ethan was here all day in the heat of our attic installing our new system. He was very polite and professional and did a great job with the install. Thank you Ethan!
Conner was exceptional. He was very professional, knowledgeable and personable. He showed us our repair options and we decided not to throw any more money at our old A/C system. He contacted the office and arranged for Chandler to come right over to give us an estimate on a new system. We were very pleased with the experience and Conner helped us through the process. Thank you Conner
Professional and courteous. I felt that I got an honest assessment of my HVAC system at a very reasonable price.
Thank you, Mark, for your 5-star review! We’re glad you had a positive experience during your Peace of Mind Membership HVAC maintenance visit in Clayton. Providing honest recommendations, professional service, and thorough system evaluations is a core part of how we help homeowners keep their heating and cooling systems operating safely and efficiently. Regular HVAC maintenance is one of the best ways to extend the life of your system, improve energy efficiency, and identify potential issues before they become costly repairs. We’re happy to hear you felt you received a fair and honest assessment of your HVAC system. Thank you for trusting Dawson’s Electric & Air with your home comfort needs. We appreciate your membership and look forward to serving you for many years to come!
Conner was professional informative and knowledgeable. Good person to represent your company.
Conner came when he said . He knew what he was doing. He is a Super nice guy.
