Morrisville, NC – HVAC Service & Electricians

Completed full HVAC system replacement including removal of existing equipment and installation of a Rheem 3-ton, 14.3 SEER2 heat pump system (Model RP14AY36AJ2NA) with matching 2-stage multipoise air handler (Model RH2TY3617STANNJ) utilizing R-454B refrigerant. Installed new outdoor condenser pad and positioned unit on exterior of residence with proper clearances for airflow and serviceability. Mounted air handler in attic space with N-coil configuration and constant torque motor for improved efficiency and comfort control. Added Tutco 8kW heat kit without breaker for supplemental heating capacity during extreme cold conditions. Integrated 2-stage zone board to enable multi-zone temperature control throughout the residence. Installed two Honeywell FocusPRO P200 programmable thermostats (Model TH2320U4006/U) configured for 3 heat/2 cool operation to provide independent climate control for separate zones. Installed float switches on air handler drain pan to prevent water damage from p

Conducted sales consultation for complete HVAC system replacement at residential property. Evaluated existing 22-year-old furnace and 14-year-old air conditioning system, both showing significant age-related wear. Inspected outdoor condenser unit positioned on concrete pad against exterior wall, noting standard residential installation with disconnect box and associated electrical components. Assessed attic-mounted air handler and ductwork configuration, observing corroded copper refrigerant lines and aged filter housing. Documented current equipment condition through photographs and discussed replacement options for both heating and cooling units with homeowner to address aging infrastructure and improve system efficiency.

Responded to service call for 9-year-old single-system HVAC unit reported to be blowing warm air. Performed diagnostic inspection of vertical air handler unit and associated electrical components, including disconnect box and safety controls. Documented equipment condition with photos of unit installation, refrigerant lines, condensate drainage, air filtration, and electrical connections for system quote preparation.

Responded to service call for air conditioning unit experiencing significant water leakage onto floor. Upon arrival, confirmed unit had been shut down by occupant to prevent further water damage. Performed diagnostic testing of electrical components and system operation using clamp meter to verify proper functionality. Inspected internal components, filter compartments, and drain system to identify source of water leak and assessed overall system condition of 11-year-old unit.

Responded to service call for non-functioning closet lights in bedroom of 2019-built home. Performed electrical system inspection and accessed main electrical panel to diagnose circuit issues affecting the bedroom closet lighting fixtures. Inspected panel wiring connections, circuit breaker configuration, and verified proper terminations at main lugs and distribution bars. Tested circuit continuity and restored power to affected lighting circuits serving the 8-foot ceiling-mounted closet fixtures.

Completed comprehensive heating and air maintenance on single-system installation including full 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustment, and safety inspections. Accessed attic-mounted air handler unit, verified blower motor assembly operation, and confirmed all electrical connections secure with proper insulation intact. All components operating within normal parameters with no deficiencies noted.

Completed electrical retrofit in laundry room and two master closets, replacing outdated fluorescent fixtures with energy-efficient LED lighting. Additionally, replaced two bathroom exhaust fans and installed new smoke detectors to enhance safety and ventilation throughout the residence.

Responded to no cooling complaint on 16-year-old system. Upon arrival, found air handler operating but insufficient cooling to conditioned space. Inspected indoor coil and evaporator assembly, documented system conditions with photos showing heat exchanger fins and refrigerant line connections. Advised customer to keep unit off until further diagnostics could be completed to determine root cause of cooling deficiency.

Completed comprehensive tune-up and coil cleaning on 2016 HVAC system per customer request. Performed electrical connections inspection and maintenance, addressed significant dirt and debris accumulation on unit surfaces and components, and cleaned condenser coils. Inspected drain pan which showed rust staining, verified all mechanical connections and refrigerant lines, and ensured system operational integrity upon completion.

Completed comprehensive 32-point annual electrical system evaluation on residential property. Performed electrical panel maintenance including torque verification and connection inspection of all circuit breakers and terminal blocks. Conducted GFCI outlet and breaker testing to verify proper shock protection functionality. Tested all AFCI breakers to ensure fire protection systems operating correctly. Performed smoke and carbon monoxide detector maintenance including battery replacement and operational testing. Replaced customer-supplied light bulbs in fixtures up to 12 feet and cleaned ceiling fans up to 12 feet. Documented electrical panel condition with photographs showing dual-column breaker configuration, main disconnect, and service entrance conductors. All safety devices tested and confirmed operational.