Holly Springs, NC HVAC & Electrical

Performed comprehensive 80-point HVAC maintenance on a 4-year-old unit that was receiving power but not operating, with a visible red indicator light. Service included cleaning outdoor condenser coils, burner cleaning, gas pressure adjustment, and thorough safety inspections to restore system functionality and efficiency.

Successfully installed a complete York HVAC system consisting of an interior furnace unit mounted on concrete blocks in the crawlspace with proper ductwork connections and a PVC drain line, along with dual exterior condensing units positioned on concrete pads with decorative gravel surround adjacent to the home's foundation.

Responded to service call for smoke detector replacement. Inspected all existing smoke detectors in the 2016 home and documented current installation with photos. Customer declined Preventative Maintenance Offer due to upcoming move. Completed full replacement of all smoke detectors throughout the residence to ensure proper fire safety system functionality.

Completed quoted electrical work including disconnection and reconnection of island wiring via crawl space and installation of Ethernet line to addition. Performed moisture testing during installation process, with readings confirming acceptable levels (17.3), and properly secured electrical conduit and junction box inside cabinet housing.

Successfully installed AUTEL electric vehicle charging system on the front exterior of the home, including mounting both the main control unit and charging connector dock to the house siding. Ran wiring from the interior electrical panel to the charging station location and completed all connections according to manufacturer specifications, with all system indicator lights showing proper operation upon completion.

Performed inspection of electrical panel to prepare for installation of 5 customer-supplied ceiling fans. Evaluated existing ceiling fixtures and wiring to ensure compatibility with fan installation requirements. Job completed according to specifications with proper electrical connections and mounting.

Successfully installed a dedicated washer machine circuit by separating it from the front circuit and installing GFCI protection. Completed all necessary permitting and inspection coordination with local authorities. Work included proper labeling of the panel and organizing wiring to ensure safe operation and code compliance.

Responded to warranty service call for non-functioning outlets. Diagnosed two outlets that failed after exposure to moisture from Christmas lights - one outdoor (non-GFCI protected) and one indoor garage outlet showing burn marks and electrical damage. Tested existing GFCI outlet with Klein Tools diagnostic equipment confirming proper voltage (123VAC) and correct wiring configuration. Reset GFCI protection to restore service to affected circuit.

Conducted site assessment for Tesla Type 2 charger installation in 1990 home. Inspected main electrical panel, documented existing circuit configuration and available capacity. Identified suitable location for new dedicated circuit required for EV charging station installation.

Successfully installed a complete HVAC system in residential property, including proper mounting of the furnace unit on a dedicated platform in the utility area. Connected all required ductwork with proper black insulation and secured all electrical components, including connection to the junction box with appropriate conduit routing.

Performed standard tune-up service on two 21-year-old HVAC units as requested. Inspection revealed significant deterioration, including extensive rust on the cooling coil assembly frame, copper tube corrosion, and possible clogging of heat exchanger fins. Additionally noted considerable discoloration and grime buildup on PVC condensate lines with visible signs of moisture damage and potential mold growth on the drain pan and surrounding components.

Disconnected existing electrical wiring for kitchen island during renovation, temporarily securing wires in crawl space to allow for cabinet installation. Will return after cabinet installation to reconnect all kitchen electrical components including garbage disposal and outlets.

Diagnosed and repaired faulty switch causing intermittent chandelier activation by replacing the smart switch that was experiencing wireless connectivity issues. Additionally installed a new electrical outlet in bedroom, ensuring proper wiring connections and secure mounting to wall according to code requirements.

Conducted sales evaluation for potential replacement of aging HVAC system in downstairs area. Inspected existing unit located in crawlspace, noting visible black growth that confirms IAQ concerns mentioned in referral. Documented current installation configuration and electrical service capacity for proper system sizing recommendations.

Completed warranty replacement of blower component for upstairs HVAC unit. Removed existing control board with deteriorated connections and installed new board, ensuring proper wire connections (red, green, blue, and black) to control terminals. Verified proper system operation after installation.

Evaluated 8-year-old Lennox heat pump system (Model 14HPX-036-230-21, SN: 1917E34205) for replacement options as requested by customer. Documented unit specifications including factory charge (10.5) and electrical data (208/230V). Took measurements of the installation area (18' x 20½') to determine appropriate sizing for replacement unit.

Successfully installed a new Rheem outdoor air conditioning unit on a concrete foundation pad, ensuring proper connection of all refrigerant lines and electrical components. Set up and programmed a Honeywell Home digital thermostat, confirming system functionality with heating mode operational and maintaining temperature at 71°F.

Responded to no heat call for a 7-year-old dual HVAC system that was not turning on. Upon inspection, found faulty control board (P-103065-03) with multiple electrical connection issues. Replaced control board and rewired connections properly, which restored normal system function and heating capability.

Conducted a system replacement assessment on aging HVAC equipment. Inspected existing ductwork in attic space, noting standard flexible metallic ducts with reflective insulation that appear to be in serviceable condition. Current Bryant thermostat is operational, maintaining heat at 72° with ambient temperature at 69°. Prepared comprehensive replacement options for customer consideration.

Performed comprehensive tune-up on upstairs HVAC unit, including electrical system verification with amperage readings of 40.95 and inspection of circuit breaker panel. Noted older system downstairs is due for replacement in July and discussed replacement options with homeowner.

Responded to service call for multiple non-functioning exterior outlets. Inspected electrical panel and identified tripped circuit breakers. Reset breakers, verified proper voltage at outlets, and tested functionality. All affected outlets now operational with proper grounding and protection.

Completed routine HVAC maintenance including 80-point inspection on each unit, outdoor coil cleaning, burner cleaning, and gas pressure adjustments. Observed significant corrosion and deterioration in unit housing, with notable rust on motor components and electrical terminals showing signs of aging. Documented electrical connection issues requiring attention during next service visit.

Completed annual 32-point electrical system evaluation including panel maintenance with proper torque checks and connection verification. Performed GFCI/Arc Fault protection testing on all breakers and outlets to confirm proper operation. Inspected and tested smoke detector functionality, replacing batteries as needed, and verified proper installation of the main electrical disconnect and service panel.

Performed comprehensive preventative maintenance on two HVAC units, including 80-point inspection of each system. Service included cleaning outdoor coils, burner cleaning, gas pressure adjustments, and safety inspections. Verified proper operation of installed TechPure germicidal UV light system and AprilAire control panel.

Responded to service call regarding intermittent power loss to oven/microwave combo unit. Performed comprehensive electrical diagnostics, including voltage testing which showed 170V at the affected circuit. Inspection of main panel revealed no issues with breakers controlling the appliance circuit. Completed whole-home safety evaluation and identified power surge as the root cause, confirming previous appliance technician's assessment.