Garner, NC HVAC & Electrical

Completed comprehensive heating and air maintenance on two newly installed units from 2025, performing 80-point inspections on each system. Cleaned outdoor coils and burner assemblies, adjusted gas pressures to manufacturer specifications, and conducted thorough safety inspections of all components. Interior inspection revealed dust accumulation on heat exchanger surfaces and minor corrosion on copper components; electrical controls, blower motor assembly, and gas valve systems were verified operational and properly wired.

Responded to no power condition at septic system control box. Inspected main electrical panel and traced circuits serving septic system equipment. Verified proper breaker positions and tested voltage at panel to identify power loss source. Documented panel configuration with breakers in various positions and multiple circuit wiring connections. Investigated electrical supply to septic control box and restored power to system, ensuring proper operation of septic equipment upon completion.

Responded to sales call for whole home ductwork replacement evaluation. Upon arrival, inspected existing single-unit HVAC system with outdoor condenser positioned on ground alongside residence. Accessed crawlspace to assess current ductwork condition and discovered extensive damage to flexible duct runs, including severely torn sections with exposed insulation material and compromised metallic outer layers. Documented existing equipment age and ductwork deterioration throughout crawlspace area. Photographed outdoor condensing unit and damaged ductwork for quotation purposes. Per homeowner request, focused assessment exclusively on ductwork replacement needs at this time, with equipment replacement options to be addressed separately at later date.

# Sales Call Summary Conducted on-site estimate for replacement of upstairs HVAC unit at residential property currently equipped with three exterior condenser units. Documented existing multi-zone system configuration with photo documentation showing all three gray condensing units positioned on gravel pad along foundation with copper refrigerant linesets and electrical disconnects properly installed. Coordinated follow-up appointment with homeowner to finalize equipment selection and installation scope for the upstairs unit replacement.

# Service Report Responded to service call for upstairs heating system defaulting to emergency heat mode. Inspected 2012 Trane XR15 heat pump system (Model 4TWR6030G1000AA) serving upper level. Accessed crawlspace to examine ductwork and verify proper airflow pathways. Documented equipment nameplate specifications and crawlspace conditions with photos. System evaluation completed with findings communicated to homeowner. Customer elected to defer preventative maintenance visit until April as requested. No emergency conditions identified during inspection.

# Electric Service Installation - Job Summary Completed a comprehensive electrical service upgrade including installation of a new 200-amp meter panel combination unit with all new breakers, connections, and copper bus bar. Mounted and wired a 100-amp sub panel in the garage featuring complete breaker assembly and copper bus bar connections. Established a new main grounding system to meet current code requirements. Installed a dedicated circuit for the septic pump system to ensure reliable operation. Excavated and trenched from the residence to the septic pump location, installing PVC conduit to protect underground wiring for both the pump and alarm circuits. Trench extended approximately 100 feet through the lawn area, maintaining proper depth for code compliance. Coordinated with the utility company for service disconnect and reconnection during the meter panel installation. Obtained necessary permits and scheduled required inspections with the local inspection authority. All work

Successfully installed two new customer-provided ceiling fans after removing pre-existing fixtures. Verified proper electrical connections at the breaker panel and confirmed both fans operate correctly with no issues.

Assessed customer's electrical upgrade requests including adding a closet outlet, washer/dryer outlet in garage adjacent to breaker panel, and ceiling fan location in living room. Inspected main electrical meter and 200A breaker panel to verify capacity for additions. Took photos of existing electrical infrastructure to document current setup before proceeding with installation planning.

Completed installation of two HVAC systems with proper electrical connections to the panel, including dedicated circuits for upstairs and downstairs furnaces as marked on the breaker panel. Outdoor unit was successfully mounted on concrete pad with refrigerant lines properly insulated and routed to the building, and system was financed through Synchrony.

Responded to service call for 13-year-old HVAC system with complaint of outside unit freezing over. Visual inspection revealed significant dust accumulation on condenser coil fins and evaporator components. System inspection also identified corrosion on internal components and dirt buildup around electrical connections at the control board where 208-230V connections are located.

Performed comprehensive electrical safety upgrades including installation of smoke/CO detection systems, GFCI-protected outlets in kitchen and at front door location, and replacement of existing recessed cans with two 6" LED adjustable temperature wafers in kitchen. All installations were tested and verified operational, with GFCI outlets confirming proper voltage (125V) and fault protection response time (0.10 sec).

Completed installation of customer-supplied porch light fixture. Diagnosed and repaired kitchen pendant light issue by replacing faulty switch. Restored functionality to pole-mounted security light in backyard by replacing bulb and cleaning weathered connections. Inspected main electrical panel and exterior service equipment to verify proper operation of all circuits.

Inspected residential electrical panel dating to 1979 construction to diagnose multiple electrical issues. Addressed non-functioning kitchen light fixture, installed new exterior outlet in front of home for landscape lighting, verified GFCI protection in bathroom outlets per code requirements, and consulted with homeowner regarding hallway lighting fixture options. Documented panel condition with photos showing main breaker configuration and internal wiring for future reference.

Completed electrical service work including the replacement of two outdoor light fixtures at the front entrance along with their corresponding interior switches. Removed a bedroom ceiling fan and installed a new light fixture with updated switch. Replaced a faulty GFCI outlet servicing the pool equipment, verified proper operation of the new installation by testing the ground fault protection functionality.

Completed comprehensive annual 32-point electrical system evaluation on 2006 residence. Performed electrical panel maintenance including connection torque verification and GFCI/Arc Fault protection testing. Verified proper functioning of smoke/CO2 detectors and replaced batteries as needed. Exterior GFCI outlets were inspected and confirmed operational with proper weatherproof protection.

Completed scheduled POM service on two 2017 HVAC units, performing 80-point inspection on each system including outdoor coil cleaning, burner cleaning, and gas pressure adjustments. Noted significant corrosion on copper line connection requiring attention and confirmed proper thermostat operation (Honeywell ProSeries set to 72°F in Cool mode with Auto fan).

Responded to service call regarding tripped breaker connected to septic tank pump. Performed thorough inspection of electrical panel, examining circuit connections and wiring integrity. Identified potential underground short causing breaker trips and documented findings with detailed photos of panel components and terminal connections for further evaluation.

Replaced HVAC plenum system with new components obtained from American Central Supply (PO#65856963-001). Installation included proper insulation of all ductwork with reflective silver material and reconnection of control sensors/devices to the system. Job completed successfully with photographic documentation of the finished installation.

Completed annual 32-point electrical system evaluation on 13-year-old residence. Performed comprehensive electrical panel maintenance including connection torque verification, GFCI/shock protection testing, and Arc Fault breaker functionality assessment. Conducted smoke and CO2 detector maintenance with battery replacement as needed.

Completed installation of three interior garage outlets, one exterior garage outlet, motion flood lights on front/back of garage, and two 8' LED lights in garage interior. All electrical components were properly mounted with appropriate metal junction boxes and flexible metallic conduit for code compliance. Installation included proper conduit routing and secure mounting to structural elements.

Responded to service call regarding non-functioning outlets. Performed diagnostic testing of electrical circuits using Klein Tools testing equipment. Inspected main breaker panel, identifying circuit issues affecting outlet functionality. Successfully restored power to all affected outlets.

Completed installation of ceiling fan in customer's residence, verifying proper mounting and electrical connections. Performed inspection of electrical panel to assess capacity for additional fan installations. Repaired loose receptacles throughout home and replaced broken smoke detector. All installations tested and functioning according to specifications.

Completed 32-point electrical system evaluation on customer's home, including panel maintenance with proper torquing of connections and comprehensive GFCI/Arc Fault testing. Replaced burned-out canned light in kitchen and performed smoke/CO2 detector maintenance with battery replacement. Customer was advised on Ring doorbell installation options to complement their existing Ring floodlight system.

Responded to service call for a kitchen light installation and electrical issues. Found a severely damaged receptacle in bedroom showing signs of thermal stress and electrical arcing. Inspection of the main panel revealed no breaker issues. Replaced burnt outlet and restored power to the 8-9 affected lighting circuits, then completed installation of fluorescent fixture above kitchen sink.

Inspected 1975-era electrical panel exhibiting multiple breaker tripping issues when customer uses several appliances simultaneously. Visual assessment revealed aging breakers with blue, green and red switches arranged in two columns, with signs of corrosion on the metal backing panel. Documented current panel condition with photos to prepare comprehensive replacement proposal as requested by homeowner.