financing Special Offers Call Us Book Online
Team image at Fuquay-Varina office

Local Heating & Air Conditioning Services in Erwin

Whether your AC stops blowing cold air on a humid July afternoon near the Cape Fear River or your furnace clicks off during an unexpected January freeze, you need an HVAC company that responds quickly and solves the real problem.

At Dawson’s Electric, we provide complete HVAC repair, system replacements, routine HVAC maintenance, and custom mini-split installations for homeowners throughout Erwin and Harnett County. Because we are licensed in electrical and HVAC trades, we handle complex installations without the hassle or extra expense of hiring outside contractors.

Need Fast AC or Furnace Repair in Erwin?

Our licensed technicians are in Harnett County every day, ready to get your home back to comfortable temperatures.

Call Dawon's at 919-887-8284 for HVAC same day HVAC service or contact us online with any questions 24/7.

Fast, Reliable AC Repair Service

When your cooling system breaks down, your house quickly traps heat and humidity. Our technicians diagnose issues fast—from frozen evaporator coils and failed capacitors to refrigerant leaks and clogged condensate drain lines.

Common signs you need AC repair service:

  • Air blowing warm or weak through your vents

  • Sudden spikes in your monthly Duke Energy bill

  • Loud squealing, grinding, or banging noises from the outdoor condenser

  • Water pooling around your air handler in the closet or attic

Repair Average Cost Range: $150 – $850

  • Key Factors: Part type (capacitor vs. compressor), system age, refrigerant type.

New AC Unit Average Cost Range: $5,800 – $12,500

  • Key Factors: System size (tonnage), SEER2 rating, single-stage vs. variable speed.

Heat Pump & Furnace Repair

North Carolina winters bring damp, biting cold. We service gas furnaces, electric heat pumps, and dual-fuel hybrid systems. If your heat pump is running continuously without reaching your thermostat setpoint or your furnace is blowing cold air, we perform complete safety and diagnostic checks to restore heat fast.

Heating Average Cost Range: $180 – $750

  • Key Factors: Flame sensors, igniters, gas valves, or blower motor replacements.

Precision HVAC Maintenance

Most emergency repairs are preventable. Annual HVAC maintenance keeps your system operating at peak efficiency, extends its lifespan by years, and keeps manufacturer warranties intact. Our seasonal tune-ups cover electrical wiring checks, blower wheel cleaning, refrigerant charge verification, and duct airflow testing.

Maintenance Average Cost Range: $160 – $280

  • Key Factors: Single vs. multi-stage maintenance plan, number of zones

Ductless Mini-Splits: Targeted Cooling for Sunrooms, Additions & Older Homes

For homes in Erwin without existing ductwork, or for bonus rooms and workshops, a ductless mini-split is an ideal solution.

  • Custom Comfort Zones: Control temperatures in individual rooms without wasting energy on unused spaces.

  • High Efficiency: Mini-splits reach up to 25+ SEER2 ratings, significantly dropping summer cooling expenses.

  • Single-Day Installation: Minimal disruption with no major drywall or ceiling reconstruction needed.

Mini-Split Average Cost Range: $3,500 – $9,800

  • Key Factors: Number of indoor wall heads (zones), line-set length, electrical panel capacity.

Why Dawson’s Electric is Recognized Among the Best HVAC Companies in Erwin

When searching for the best HVAC companies in Harnett County, homeowners look for honesty, technical skill, and local accountability.

  1. Dual HVAC + Electrical Expertise: Installing a modern 18+ SEER2 heat pump or multi-head mini split often requires upgrading an older 100-amp electrical panel to a 200-amp panel. We handle the panel upgrade and HVAC installation simultaneously.

  2. Crawlspace & Humidity Specialists: Many Erwin homes feature raised crawlspace foundations prone to high dampness. We assess duct insulation and return air systems to prevent indoor mold and damp air pull.

  3. Maximizing Duke Energy Rebates: We assist Erwin residents in qualifying for local utility rebates and federal tax credits on high-efficiency heat pump systems, saving you money up front.

Recent Jobs and Reviews in Erwin, NC

Erwin, NC at a glance

Dawson's Electric & Air has completed 10 jobs in Erwin, NC between June 2026 and November 2026.

The most recent job was on November 11, 2026.

Dawson's Electric & Air has completed 25 jobs in Erwin, NC in the last 12 months. The first job there was in December 2018.

Job Locations and Reviews

Responded to a no-heat call on a single-system installation with a non-communicating thermostat. Inspected the air handler disconnect and low-voltage wiring, finding frayed, exposed conductors at the cable entry point, and inspected the outdoor unit, which had heavy grass clippings, debris, and cobwebs packed around the internal components and refrigerant lines. Documented these conditions as the likely causes of the loss of thermostat communication and recommended wiring repair and a thorough cleaning of the outdoor unit to restore reliable heating operation.
Responded to a no-heat call on a single-system installation with a non-communicating thermostat. Inspected the air handler disconnect and low-voltage wiring, finding frayed, exposed conductors at the cable entry point, and inspected the outdoor unit, which had heavy grass clippings, debris, and cobwebs packed around the internal components and refrigerant lines. Documented these conditions as the likely causes of the loss of thermostat communication and recommended wiring repair and a thorough cleaning of the outdoor unit to restore reliable heating operation.
Connor G.
Connor G. Checked in
Responded to a no-heat call on a single-system installation with a non-communicating thermostat. Inspected the air handler disconnect and low-voltage wiring, finding frayed, exposed conductors at the cable entry point, and inspected the outdoor unit, which had heavy grass clippings, debris, and cobwebs packed around the internal components and refrigerant lines. Documented these conditions as the likely causes of the loss of thermostat communication and recommended wiring repair and a thorough cleaning of the outdoor unit to restore reliable heating operation.
Erwin, NC 28339
Responded to a quality-control callback for a sagging, unstable ductless mini-split indoor unit mounting bracket on the right-hand side. Re-secured the wall-mount bracket and fastened it properly to the wall, eliminating the sag and wobble. Verified the indoor unit is level, rigidly mounted, and free of visible damage, with no frost, ice, or other anomalies observed.
Responded to a quality-control callback for a sagging, unstable ductless mini-split indoor unit mounting bracket on the right-hand side. Re-secured the wall-mount bracket and fastened it properly to the wall, eliminating the sag and wobble. Verified the indoor unit is level, rigidly mounted, and free of visible damage, with no frost, ice, or other anomalies observed.
Ethan N.
Ethan N. Checked in
Responded to a quality-control callback for a sagging, unstable ductless mini-split indoor unit mounting bracket on the right-hand side. Re-secured the wall-mount bracket and fastened it properly to the wall, eliminating the sag and wobble. Verified the indoor unit is level, rigidly mounted, and free of visible damage, with no frost, ice, or other anomalies observed.
Erwin, NC 28339
Performed a quality control inspection of a wall-mounted Mitsubishi Electric mini-split system. Verified the indoor unit installation, confirming secure mounting, intact louvers, and no visible frost, rust, cracks, or damage. Tested the wireless remote controller, confirming proper operation in heat mode at a 75°F setpoint with correct fan speed and clock display.
Performed a quality control inspection of a wall-mounted Mitsubishi Electric mini-split system. Verified the indoor unit installation, confirming secure mounting, intact louvers, and no visible frost, rust, cracks, or damage. Tested the wireless remote controller, confirming proper operation in heat mode at a 75°F setpoint with correct fan speed and clock display.
Keith M.
Keith M. Checked in
Performed a quality control inspection of a wall-mounted Mitsubishi Electric mini-split system. Verified the indoor unit installation, confirming secure mounting, intact louvers, and no visible frost, rust, cracks, or damage. Tested the wireless remote controller, confirming proper operation in heat mode at a 75°F setpoint with correct fan speed and clock display.
Erwin, NC 28339
Installed a Mitsubishi MZ-WX 24K BTU inverter heat pump system (R454B) consisting of a MUZ-WX24NL outdoor unit and MSZ-WX24NL wall-mount indoor unit, with the outdoor unit set level on a pad and connected via refrigerant lines, conduit, and a disconnect. Ran a dedicated 208-230V circuit, including the extended run beyond 20 ft, and concealed the line set with line hide for a clean exterior finish.
Installed a Mitsubishi MZ-WX 24K BTU inverter heat pump system (R454B) consisting of a MUZ-WX24NL outdoor unit and MSZ-WX24NL wall-mount indoor unit, with the outdoor unit set level on a pad and connected via refrigerant lines, conduit, and a disconnect. Ran a dedicated 208-230V circuit, including the extended run beyond 20 ft, and concealed the line set with line hide for a clean exterior finish.
Ethan N.
Ethan N. Checked in
Installed a Mitsubishi MZ-WX 24K BTU inverter heat pump system (R454B) consisting of a MUZ-WX24NL outdoor unit and MSZ-WX24NL wall-mount indoor unit, with the outdoor unit set level on a pad and connected via refrigerant lines, conduit, and a disconnect. Ran a dedicated 208-230V circuit, including the extended run beyond 20 ft, and concealed the line set with line hide for a clean exterior finish.
Erwin, NC 28339
Completed comprehensive heating and air maintenance on 2021 single-system unit including full 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustments, and safety inspections. Inspected air handler interior components, control board wiring connections, and blower assembly. All electrical connections, wire nuts, and control modules verified secure and operational with normal dust accumulation noted throughout cabinet interior.
Completed comprehensive heating and air maintenance on 2021 single-system unit including full 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustments, and safety inspections. Inspected air handler interior components, control board wiring connections, and blower assembly. All electrical connections, wire nuts, and control modules verified secure and operational with normal dust accumulation noted throughout cabinet interior.
Jose A.
Jose A. Checked in
Completed comprehensive heating and air maintenance on 2021 single-system unit including full 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustments, and safety inspections. Inspected air handler interior components, control board wiring connections, and blower assembly. All electrical connections, wire nuts, and control modules verified secure and operational with normal dust accumulation noted throughout cabinet interior.
Erwin, NC 28339
Responded to no cooling complaint on 2017 system experiencing inadequate cooling during peak afternoon heat loads. Performed comprehensive system evaluation including refrigerant pressure analysis and supply air temperature verification. Measured supply air temperature at 65.9°F at register and documented system operating pressures showing suction pressure of 94 PSI, discharge pressure of 414 PSI, subcooling of 25.09°F, and superheat of 44°F, indicating potential refrigerant charge deficiency or airflow restriction requiring further diagnosis.
Responded to no cooling complaint on 2017 system experiencing inadequate cooling during peak afternoon heat loads. Performed comprehensive system evaluation including refrigerant pressure analysis and supply air temperature verification. Measured supply air temperature at 65.9°F at register and documented system operating pressures showing suction pressure of 94 PSI, discharge pressure of 414 PSI, subcooling of 25.09°F, and superheat of 44°F, indicating potential refrigerant charge deficiency or airflow restriction requiring further diagnosis.
Thomas M.
Thomas M. Checked in
Responded to no cooling complaint on 2017 system experiencing inadequate cooling during peak afternoon heat loads. Performed comprehensive system evaluation including refrigerant pressure analysis and supply air temperature verification. Measured supply air temperature at 65.9°F at register and documented system operating pressures showing suction pressure of 94 PSI, discharge pressure of 414 PSI, subcooling of 25.09°F, and superheat of 44°F, indicating potential refrigerant charge deficiency or airflow restriction requiring further diagnosis.
Erwin, NC 28339
Completed comprehensive tune-up service on 6-year-old single HVAC system. Performed standard maintenance procedures including filter inspection, system diagnostics, and operational testing. Accessed unit through crawl space where main trunk line and branch ductwork were inspected; system found to be operating within normal parameters upon completion of service.
Completed comprehensive tune-up service on 6-year-old single HVAC system. Performed standard maintenance procedures including filter inspection, system diagnostics, and operational testing. Accessed unit through crawl space where main trunk line and branch ductwork were inspected; system found to be operating within normal parameters upon completion of service.
Thomas M.
Thomas M. Checked in
Completed comprehensive tune-up service on 6-year-old single HVAC system. Performed standard maintenance procedures including filter inspection, system diagnostics, and operational testing. Accessed unit through crawl space where main trunk line and branch ductwork were inspected; system found to be operating within normal parameters upon completion of service.
Erwin, NC 28339
Completed comprehensive heating and air maintenance on 2022 gas pack unit including full 80-point inspection. Performed outdoor coil cleaning, burner cleaning, and adjusted gas pressures to manufacturer specifications. Conducted safety inspections of all system components including electrical connections at exterior service panel and verified proper operation of blower compartment and evaporator coil. All systems tested and operating within normal parameters upon completion.
Completed comprehensive heating and air maintenance on 2022 gas pack unit including full 80-point inspection. Performed outdoor coil cleaning, burner cleaning, and adjusted gas pressures to manufacturer specifications. Conducted safety inspections of all system components including electrical connections at exterior service panel and verified proper operation of blower compartment and evaporator coil. All systems tested and operating within normal parameters upon completion.
Connor G.
Connor G. Checked in
Completed comprehensive heating and air maintenance on 2022 gas pack unit including full 80-point inspection. Performed outdoor coil cleaning, burner cleaning, and adjusted gas pressures to manufacturer specifications. Conducted safety inspections of all system components including electrical connections at exterior service panel and verified proper operation of blower compartment and evaporator coil. All systems tested and operating within normal parameters upon completion.
Erwin, NC 28339
Responded to no cool air complaint on 3-year-old residential air conditioning system. Upon inspection, discovered severely clogged condensate drain line preventing proper system operation. Cleared heavy sediment and debris buildup from PVC drain line to restore proper drainage. Verified system electrical readings at outdoor unit showing 524.4 volts, confirming adequate power supply to equipment. Restored cooling operation and ensured condensate removal system functioning properly to prevent future shutdowns.
Responded to no cool air complaint on 3-year-old residential air conditioning system. Upon inspection, discovered severely clogged condensate drain line preventing proper system operation. Cleared heavy sediment and debris buildup from PVC drain line to restore proper drainage. Verified system electrical readings at outdoor unit showing 524.4 volts, confirming adequate power supply to equipment. Restored cooling operation and ensured condensate removal system functioning properly to prevent future shutdowns.
Thomas M.
Thomas M. Checked in
Responded to no cool air complaint on 3-year-old residential air conditioning system. Upon inspection, discovered severely clogged condensate drain line preventing proper system operation. Cleared heavy sediment and debris buildup from PVC drain line to restore proper drainage. Verified system electrical readings at outdoor unit showing 524.4 volts, confirming adequate power supply to equipment. Restored cooling operation and ensured condensate removal system functioning properly to prevent future shutdowns.
Erwin, NC 28339
Completed comprehensive heating and air maintenance on one 2020 HVAC unit including 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustments, and safety inspections. Verified refrigerant line connections and measured electrical amperage readings using clamp meter to ensure proper system operation. All components found operating within normal parameters and unit left in proper working condition.
Completed comprehensive heating and air maintenance on one 2020 HVAC unit including 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustments, and safety inspections. Verified refrigerant line connections and measured electrical amperage readings using clamp meter to ensure proper system operation. All components found operating within normal parameters and unit left in proper working condition.
Aaron P.
Aaron P. Checked in
Completed comprehensive heating and air maintenance on one 2020 HVAC unit including 80-point inspection, outdoor coil cleaning, burner cleaning, gas pressure adjustments, and safety inspections. Verified refrigerant line connections and measured electrical amperage readings using clamp meter to ensure proper system operation. All components found operating within normal parameters and unit left in proper working condition.
Erwin, NC 28339